<< Back

Now Hanchei chemical equipment with you together discuss the safety of stainless steel reactors.

1. First check whether the stainless steel reactor device has been installed. It must be installed on a firm and stable workbench. As for the height of the workbench, it is measured according to the different operating conditions of different customers. Do not fill up the vicinity of the work, and make sure that there is a space near the workbench to facilitate the installation and protection in the future.

2. In the installation process of the stainless steel reactor, the drive shaft and the ground level are required to be as straight as possible, less than 1/1000 of the total height of the equipment

3. The self-prepared parts and safety valves on the equipment's own process takeovers must be equipped in accordance with the professional regulations of the stainless steel reactor.

4. After the operation of the stainless steel reactor device is completed, it is necessary to carefully check all the connecting parts of the reactor and whether the transmission direction is strong.