What is the thickness of the enamel layer of the enamel reactor?

Many companies believe that the thickness of the glass-lined reactor has nothing to do with the quality and service life of the equipment. In fact, it is not. When manufacturing the glass-lined layer of the glass-lined reactor, the workers must strictly follow the thickness standard.

Some people may ask whether the thickness of the glass-lined layer of the glass-lined reactors used in different industries is the same? In fact, they are different. Because different industries have different uses, we all have corresponding standards for the use of different industries. Yes, if the customer has additional requirements for the product, we can adjust the thickness of the glass-lined layer according to the customer's needs. Next, let’s take a look at the thickness of the glass-lined layer of the glass-lined reactor.

1) The thickness of the enamel reactor layer is 0.8-2.0mm. When the nominal volume is greater than or equal to 10000L, the upper limit of thickness can be allowed to 2.2mm; when the nominal volume is greater than or equal to 20000L, the upper limit of thickness can be allowed to 2.4mm. The thickness of the glass-lined layer of the mechanical seal section of the glass-lined equipment is allowed to be 0.6mm. The thickness of the glass-lined layer should be as uniform as possible, the thickness of the glass-lined layer on the convex surface should be thin, and the thickness area should be smoothly transitioned.

2) The thickness of the glass-lined layer is tested according to GB/T7991.